경질 접착제

1. 개요

  •  상온 화학반응경화형 2액형 제품으로써 접착력이 우수하고 또한 내약품성, 내유성, 내열성
  •  기계적 강도(신장률, 인장강도, 내마모성 등)가 우수하여 필터 접착용으로 사용되는 제품입니다.

    • 2. 용도

  •  Filter panel pleat의 측면 접착
  •  실린더형 Filter의 joint 접착
  •  Cabin filter 케이스 접착
  •  에어/오일/연료 Filter 측면 접착

    • 3. 특징

  •  접착력 우수
  •  경화가 빠르고 작업성 우수
  •  내약품성, 내유성, 내열성 우수
  •  금속외 알루미늄 등의 비철 금속에도 접착력 우수

    • 4. 물성표

    Typical Properties
    ITEM UNIT DS-70PS
    Component A (polyol)    		 DS-70I
    Component B (Isocyanate)
    S.G(25/4 ℃) 1.0 - 1.05 1.20 - 1.25
    Viscosity (25 ℃) cps 600 - 1800 150 - 200
    Mixing Ratio parts by weight 100 70
    Color of Mixture NATURAL, BLACK, OTHERS
    Reaction Characteristics
    ITEM Type DS-70PS DS-70I
    Resin Temp HT/F (25 ℃) Hand Missing 25 / 25 25 / 25
    Machine 25 / 25 25 / 25
    Cream Time (sec) Hand Missing 20 - 30
    Machine 20 - 30
    Rise Time (sec) Hand Missing 40 - 60
    Machine 40 - 60
    Tack free time (sec) Hand Missing 40 - 60
    Machine 40 - 60
    Demold Time (min) Hand Missing 3 - 5
    Machine 3 - 5
    Physical Properties
    ITEM SPECIFICATION
    Mold foam density (gr/cm2) 0.60 - 0.80
    Hardness (ASKER C TYPE) 90 - 100
    Tensile strength (kg/cm2) 65 - 75
    Elongation (%) 110 - 140
    Tear strength (kg/cm) 25 - 35
    Shrinkage (%) 0.1 - 0.5
    Packing
    Component A (DS-70) Component B (DS-70I)
    Packing 200kg net in steel drum. 250kg net in steel drum.
    Typical Properties
    ITEM UNIT DS-80PS
    Component A (polyol)    		 DS-80I
    Component B (Isocyanate)
    S.G(25/4 ℃) 1.0 - 1.05 1.20 - 1.25
    Viscosity (25 ℃) cps 600 - 1800 150 - 200
    Mixing Ratio parts by weight 100 80
    Color of Mixture NATURAL, BLACK, OTHERS
    Reaction Characteristics
    ITEM Type DS-80PS DS-80I
    Resin Temp HT/F (25 ℃) Hand Missing 25 / 25 25 / 25
    Machine 25 / 25 25 / 25
    Cream Time (sec) Hand Missing 20 - 30
    Machine 20 - 30
    Rise Time (sec) Hand Missing 40 - 60
    Machine 40 - 60
    Tack free time (sec) Hand Missing 40 - 60
    Machine 40 - 60
    Demold Time (min) Hand Missing 3 - 5
    Machine 3 - 5
    Physical Properties
    ITEM SPECIFICATION
    Mold foam density (gr/cm2) 0.70 - 0.90
    Hardness (ASKER C TYPE) 98 - 100
    Tensile strength (kg/cm2) 65 - 75
    Elongation (%) 110 - 140
    Tear strength (kg/cm) 25 - 35
    Shrinkage (%) 0.1 - 0.5
    Packing
    Component A (DS-80) Component B (DS-80I)
    Packing 200kg net in steel drum. 250kg net in steel drum.

    (주)대성이화 | 경기도 화성시 양감면 송산리 258-10 | 대표: 김용성 | 사업자등록번호: 124-81-97396

    TEL: 031-352-6824 | 031-352-6825 | FAX: 031-352-6878

    대성이화 © Copyright 2021. All Rights Reserved.